Setting a Victron Multiplus Compact with Battle Born LiFePO4 Batteries
The above video walks you through how to properly configure a Victron Multiplus Compact with Battle Born LiFePO4 batteries. Parts Needed: Battle Born Battery with Cables Ethernet Cable – little pointer break off the RJ45…
How To Configure Victron BMV-700 with LiFePO4 Batteries
The Victron BMV-700 LiFePO4 battery monitor is a highly precise device to track important information regarding your Battle Born lithium battery system. It displays voltage, amperage, and the time remaining until the battery bank is…
Configuring Victron Centaur Battery Bank Charger with LiFePO4 Batteries
Configuring the Victron Centaur battery bank charger to work with Battle Born LiFePO4 batteries is very simple. All that you will need to do is set the DIP switches accordingly: DIP switch 1: OFF (down…
Setting Up a Trimetric Battery Monitor with Battle Born Batteries
When used in combination with Bogart Engineering Solar Charger, the Trimetric TM-2030 Battery Monitor allows the user to precisely alter the charging parameters used on the Battle Born Batteries. Here is how to set up…
Does a Cotek Battery Charger Work With Battle Born LiFePO4 Batteries?
The Cotek CX1215 battery charger performs extremely well with our LiFePO4 batteries. This charger not only looks great, it performs even better. The best part is that this charger is ready to be used with…
Using the OutBack FLEXmax with a Battle Born LiFePO4 Battery
The OutBack FLEXmax is one of the most versatile chargers that we have tested. It has a very intuitive user interface that makes programming it to work with a Battle Born Battery very straightforward. Tools Needed:…
Setting Up a TriStar Charge Controller with a Battle Born LiFePO4 Battery
The Morningstar Tri-star PWM works extremely well with any Battle Born battery bank once a few settings are changed. This guide will walk you through those changes to make the installation of your batteries as…