Magnum Energy MPPT Charge Controller

Features

Output Current: 100 amps
Battery Voltage: 12, 24, or 48 V
MPPT: Yes
Power Consumption: < 4 watts (fan off, display/LEDs off)
Maximum PV input voltage (any condition): 200 VDC + battery voltage or 240 VDC – whichever is lower
Maximum PV operating voltage: 187 VDC
Maximum PV array short circuit current: 100 ADC
Nominal battery voltage range: 12, 24, or 48 VDC
Battery charger output voltage range: 10 to 66 VDC
Continuous charger output current: 100 ADC (from -20°C to +40°C) with proportional power reduction up to 60°C ambient
Maximum output power: 6600 watts
Efficiency: 99% typical
Charger regulation method: Automatic three-stage (bulk, absorption, float) charge with manual equalization
Battery temperature compensation: With Battery Temperature Sensor (BTS) connected (battery temperature -20 °C to +55 °C)
Internal cooling: Using dual ball-bearing fans for long life
Overcurrent protection: With two overlapping circuits
Over-temperature protection: On transformer and MOSFETS
Listings: ETL Listed to UL/cUL 1741, CSA C22.2 #107.1-01
Warranty: Five years parts and labor
Operating temperature: -20° C to +60° C (-4° F to 140° F)
Nonoperating temperature: -40° C to +70° C (-40° F to 158° F)
Operating humidity: 0 to 95% RH non condensing
Enclosure type: Indoor, ventilated, with removable powder-coated conduit box
Unit dimensions (w x h x d): 8.5″ x 15.5″ x 4.0″ (21.6 cm x 39.4 cm x 10.2 cm)
Shipping dimensions (w x h x d): 11.5” x 19.5” x 8.125” (29.2 cm x 49.5 cm x 20.6 cm)
Mounting: Mounted on a vertical surface (wall) or installed on MP or MMP enclosure
Weight: 13.6 lb (6.2 kg)
Shipping weight: 18 lb (8.2 kg)
Max operating altitude: 15,000’ (4570 m)