12V GC2 LiFePO4 Heated Battery Kit
$1,050.00 – $6,300.00
This 100Ah 12V Heated GC2 LiFePO4 Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance! Equipped with a proprietary, low draw internal heating technology, this lithium battery is ready to charge and provide superior power no matter the cold weather you may face.
- Drop-In Replacement for 6V GC2 lead acid batteries
- Designed for Versatility with the ability to be wired in series or parallel and mounted in any orientation
- Safe & Reliable lithium iron phosphate (LiFePO4) chemistry
- Rugged Battery Design built for RV, camper van, boat, trolling motor, industrial, off-grid, and residential backup applications
- Lightweight at just 31 pounds for 100Ah of usable power power
- Long-Lasting with 3,000-5,000 deep discharge cycles providing up to 10-15 years of power
- Internal BMS featuring low temperature protection, high and low voltage, short circuits, and more
-
Description
The powerful battery solution to elevate any outdoor adventure. It’s time to upgrade from your traditional lead acid battery! What you need is a new battery that’s lighter, safer, and works with various systems. More importantly, it should be able to keep you company for many of your outdoor adventures! This 100Ah 12V Heated GC2 LiFePO4 Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance!
Our lithium-ion batteries are designed for long-term use and can last up to 10 times longer than lead-acid batteries, with 3,000-5,000 deep discharge cycles. These LiFePO4 batteries also have an internal Battery Management System (BMS), which protects them from common battery failures like high and low voltage, short circuits, and hot and cold temperatures. Compared to a conventional lead acid battery, our rechargeable Battle Born Batteries are 1/5th the weight for the same amount of usable power, weighing in at just 31 lbs. They, too, provide up to 3x more power in the same physical space, and charge 5x faster.
With maximum safety, flexibility, and versatility, these LiFePO4 batteries can be wired in series or parallel and installed in any position, orientation, or space. Battle Born Batteries are made with quality in mind. We source our raw materials from reputable suppliers and assemble lithium batteries using cylindrical cells in our 99,000-square-foot facility in Reno, Nevada.
More details about our LiFePO4 deep cycle batteries:
- Dimensions: 10.31 × 7.28 × 11.02 in
- Ships with 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts, brass washers, and 18-8 stainless steel nuts with nylon inserts. Invest in a battery and power you can count on.
What’s Included?
These Battle Born Batteries heated battery kits offer our :
- 100Ah 12V GC2 Heated Battle Born Batteries
- Heat Battery Kits
- Heat Battery Jumper Wires
- Heat Battery Add-on Kits (200Ah-600Ah only)
The 100Ah 12V GC2 deep cycle LiFePO4 battery uses a proprietary, low draw technology to keep your battery warm and ready to charge no matter what weather you may face. The stable chemistry and built-in battery management system help provide you with safe and reliable power on your adventures. Our batteries are also backed by a 10-year warranty to make your battery anxiety a thing of the past!
The Heat Battery Kits come with an enable switch and necessary wires so that you can enable and disable your heated battery from anywhere in your system. Included is the Heat Battery Jumper Wire which allows you to directly enable the heated element from your battery if you do not wish to use the Heat Battery Kit.
About Our Heated Battery
Installation Video
Please Note: A CSL is required for use with inverters 3500W or higher.
Features
Internal Heat Technology:
- Proprietary internal heating capabilities
- Operating Temp Range:-4°F to 135°F
- Heat activated when internal temperature reaches ~35°F (and heat function is enabled)
Accepted Voltages:
- Charging voltage: 14.2 – 14.6 V
- Float voltage: 13.4 – 13.8 V
Dimensions (L x W x H):
- 10.31 x 7.28 x 11.02 in.
Ships With:
- 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts
- Brass washers
- 18-8 stainless steel nuts with nylon inserts
Items in Each Heated Battery Kit Includes:
- 1 -SPST Rocker Switch
- 1 -25’ 18 AWG wire terminated with 0.187 QD and #8 ring lug
- 1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug
- 1 – Jumper wire
-
- Add-On Kit Includes (If you are installing more than one heat-enabled battery model):
- 1 -14-inch 18 AWG wire terminated with two #8 ring lugs
- 2 -M4 x 5mm long Philip head screws
- 1 -#8 ring lug
- 1 -1-inch piece of shrink wrap
- Add-On Kit Includes (If you are installing more than one heat-enabled battery model):
-
Please Note: A CSL is required for use with inverters 3500W or higher.
Additional information
| Dimensions | 10.31 × 7.28 × 11.02 in |
|---|---|
| Amp Hour | 100Ah, 200Ah, 300Ah, 400Ah, 500Ah, 600Ah |
10-Year Limited Warranty
Only logged in customers who have purchased this product may leave a review. Login here.
Reviews
There are no reviews yet.