Configuring Victron Centaur Battery Bank Charger with LiFePO4 Batteries

Configuring the Victron Centaur battery bank charger to work with Battle Born LiFePO4 batteries is very simple. All that you will need to do is set the DIP switches accordingly: DIP switch 1: OFF (down position) DIP switch 2: ON (up position) DIP switch 3: OFF (down position) Once these…

How to Set Up a TriStar PWM Charge Controller with LiFePO4 Batteries

Setting up your Tristar PWM charge controller to work with Battle Born LiFEPO4 batteries is a cinch! Step 1: Remove the access cover. This is the front cover on the unit that is held in with four screws. Step 2: Adjust the first three DIP switches. The first three DIP…

Does a Cotek Battery Charger Work With Battle Born LiFePO4 Batteries?

The Cotek CX1215 battery charger performs extremely well with our LiFePO4 batteries. This charger not only looks great, it performs even better. The best part is that this charger is ready to be used with our batteries right out of the box! Just plug the Cotek CX1215 into a AC…

Charger Compatibility Table

Whether it be a solar charge controller or a marine grade converter, our customers want to know if their device will work to charge our batteries. We do our absolute best to test every charger we can, and by doing so, we have created this charger compatibility table of products…

Using a PowerMax AC to DC Converter Charger With Battle Born Batteries

The Powermax PM3-55LK AC to DC Converter/Charger is a fantastic converter/charger that works tremendously well with Battle Born 100Ah 12V LiFePO4 batteries! The most prominent feature of this charger is the ability to manually adjust the charging voltage. This is huge for LiFePO4 batteries because it enables the user to…

How to Use Powermania MV2 Series Charger With Battle Born Batteries

Powermania MV2 Series Charger With Battle Born Batteries We at Battle Born Batteries are excited about our collaboration with Powermania out of the San Francisco Bay Area. Powermania makes a line of sealed marine chargers called the Turbo MV2 series. These 12 V chargers range in charging current from 12…

Setting Up a TriStar Charge Controller with a Battle Born LiFePO4 Battery

The Morningstar Tri-star PWM works extremely well with any Battle Born battery bank once a few settings are changed. This guide will walk you through those changes to make the installation of your batteries as simple as possible. Step 1: Locate the DIP switches behind the negative power terminals. Notice…

Can I Use the Marinco Charger with a Battle Born LiFePO4 Battery?

The Marinco 6 amp 12 volt charger comes pre-programmed with 3 charging cycles for a quick recovery. Soft Start (<10 V for 30 seconds) Bulk Stage (10 V-14.3 V) Adsorption Stage With the built-in auto sense, this unit will detect a battery’s voltage and automatically start the charging cycle. Once…

Charging LiFePO4 Batteries

Every day we get questions about charging LiFePO4 batteries and lithium battery chargers. We’ve reviewed products that work well with our Battle Born LiFePO4 batteries. To begin the series we will discuss the basics of charging batteries, and the products will be covered in other segments. Charging a LiFePO4 Battery…