Victron BlueSolar MPPT 100/30-50 Charge Controller with LiFePO4
Applicable Models: 100|30, 100|50 The ease of use and user-motivated design has quickly made this Victron BlueSolar charge controller to become one of our favorites. Check out our video, where we go through how to set up the BlueSolar charge controller along with out Battle Born Batteries. If anything is…
Dual Pro Multi-bank Charging System
The Dual Pro Multi-bank is one of the most popular chargers among the bass fishing community. For that reason, we partnered up with Dual Pro to create a charging algorithm specific to our batteries. Please watch the above video for more information. If anything is unclear or if you have…
Progressive Dynamics Battery Chargers
Applicable Models: PD9130LV, PD9145ALV, PD9160ALV Progressive Dynamics makes exceptionally well built and dependable chargers. Watch the video for a hands-on guide to setting up a Progressive Dynamics battery charger with Battle Born Batteries! First, loosen the terminals on the charger and connect the positive wire (usually red) to positive terminal…
How To Configure Victron BMV-700 with LiFePO4 Batteries
The Victron BMV-700 LiFePO4 battery monitor is a highly precise device to track important information regarding your Battle Born lithium battery system. It displays voltage, amperage, and the time remaining until the battery bank is fully charged or depleted. The Victron BMV can also monitor historical data, such as battery…
Configuring Victron Centaur Battery Bank Charger with LiFePO4 Batteries
Configuring the Victron Centaur battery bank charger to work with Battle Born LiFePO4 batteries is very simple. All that you will need to do is set the DIP switches accordingly: DIP switch 1: OFF (down position) DIP switch 2: ON (up position) DIP switch 3: OFF (down position) Once these…
How to Set Up a TriStar PWM Charge Controller with LiFePO4 Batteries
Setting up your Tristar PWM charge controller to work with Battle Born LiFEPO4 batteries is a cinch! Step 1: Remove the access cover. This is the front cover on the unit that is held in with four screws. Step 2: Adjust the first three DIP switches. The first three DIP…
Setting Up a Trimetric Battery Monitor with Battle Born Batteries
When used in combination with Bogart Engineering Solar Charger, the Trimetric TM-2030 Battery Monitor allows the user to precisely alter the charging parameters used on the Battle Born Batteries. Here is how to set up a Trimetric TM-2030 battery monitor and Bogart Engineering solar charge controller to operate with Battle…
Charger Compatibility Table
Whether it be a solar charge controller or a marine grade converter, our customers want to know if their device will work to charge our batteries. We do our absolute best to test every charger we can, and by doing so, we have created this charger compatibility table of products…
Using the OutBack FLEXmax with a Battle Born LiFePO4 Battery
The OutBack FLEXmax is one of the most versatile chargers that we have tested. It has a very intuitive user interface that makes programming it to work with a Battle Born Battery very straightforward. Tools Needed: 1. #2 Phillips Screwdriver 2. Flat Head Screwdriver Before starting, make sure to disconnect PV…