Lynx Distributor


The Victron Energy Lynx Distributor is a modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system, available as M8 and M10 models.


SKU: LYN060102000 Categories: , ,


The Victron Energy Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.

The Lynx Distributor has a power LED and four fuse status indication LEDs. If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can.


Fuses: The Lynx Distributor uses MEGA fuses. Please note that some MEGA fuses are only rated to 36 Volt (suitable for 24V systems), and you must use 58/64V rated fuses for 48V systems.

Installation: Connectors and dip-switches include:

  • The R11 connector is to power the Lynx-distributor from the Lynx-shunt
  • The DIP switch on the Lynx distributor is for specific manual settings to do with our 24V batteries. Please don’t touch.
  • The 6-pin header block on the Lynx Distributor is for reading out the fuses, but this feature is not supported.

Additional information

Weight 4.4 lbs
Dimensions 11.1 × 6.77 × 3.07 in
Lynx Distributor Manual



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review. Login here.

You may also like…