855.292.2831

TALK TO AN EXPERT

Special Hours: 7AM – 6PM PST

Powered by Dragonfly Energy Graphic
FREE GROUND SHIPPING*
American Flag Graphic
PROUD AMERICAN COMPANY

Shop

Schneider Conext Configuration Tool

Schneider Conext Configuration Tool

$906.00

-

865-1155-01

Resources

Need Help?

Ask a technical specialist now at 855.292.2831

You Might Also Like

Product Description

The Conextโ„ข Configuration tool is a PC-based software used by system installers to calibrate multi-unit systems during system configuration and reduce installation time.

The Conext Configuration tool is not meant to replace the Insight or any other monitoring devices. ย Those monitoring devices may still be required to monitor Schneider Electric solar and storage system and components.

Software and drivers for the Conext Configuration Tool are under the downloads section (Firmware).

Conext Config USB Driver is firmware used for general installation setup.

Conext Config Tool Software_AI (Anti-Islanding) is used when 2 or more inverters are installed in parallel on a single phase connection (See Conext XW+ Multi-Unit Power System Design Guide under the downloads section (Technical Publications). It is also used if there is a specific requirement by a utility.

Note:ย Adjustment of AC anti-islanding parameters should only be done after consultation with the power utility or authority having jurisdiction.

Learn More from Schneider Electric.

Features

Features

System Configuration using Configuration Wizards

  • Configuration Wizards provide a fast way of configuring inverter/chargers and charge controllers to get the system up and running quickly
  • Configurations can be saved and used to by OEMโ€™s to program multiple units
  • It can change the output frequency from 60 to 50 Hz and vice versa

Device Configuration for Conext System devices

  • The main purpose of the individual device configuration menus is not to configure the entire Conext System but to configure settings that are not available on device configuration wizards, such as the auxiliary outputs of the Conext XW Inverter/Charger and the Conext XW Solar Charge Controllers.
  • Provides a tool for system analysis
  • It allows the user to calibrate the output voltage on the Conext XW+ when stacking units.

Documentation

Download product documentation for the Schneider Conext Configuration Tool, including Product Manuals, Cutsheets, Data Sheets, Quick Install Guides, Firmware Updates, Configurations, and more.
Schneider Conext Configuration Tool Datasheet

Document

Technical Support

Have questions about whether the Schneider Conext Configuration Tool is suitable for your power system? Battle Born Batteries’ Technical Sales Specialists are here to provide system consultations and support, answer questions, help you place an order, and more.
Call
Email

Copyright ยฉ 2024 Dragonfly Energy. All rights reserved. Dragonfly Energy collects personal information for its internal use. We do not share customer information with any third parties.