A PWM solar charge controller is one of the simplest ways to regulate power from solar panels into a battery bank. PWM, or Pulse Width Modulation, works best when the solar panel voltage is closely matched to the battery voltage, making it a practical and affordable option for many smaller 12V solar systems.
PWM controllers were once one of the most common choices for RV and off-grid solar, but they are used less often today as MPPT solar charge controllers have become more affordable and offer better performance and flexibility in many modern systems.
That does not mean PWM controllers are obsolete. They can still make sense in the right application, and many RVs and older solar installations already have one in place.
In this guide, we'll explain how PWM solar charge controllers work, where the technology came from, when PWM still makes sense, how it compares with MPPT, and when upgrading may be worthwhile.
Table of Contents
- What Is a PWM Solar Charge Controller?
- How Pulse Width Modulation Really Works
- Why is PWM solar control less efficient for solar?
- PWM vs. MPPT Solar Charge Controllers: Real Use
- When Does a PWM Solar Charge Controller Make Sense?
- Can You Use a PWM Solar Charge Controller With Lithium Batteries?
- When Should You Upgrade From PWM to MPPT?
- Is MPPT Always Better Than PWM?
- Upgrade Your RV Solar System With an MPPT Charge Controller
- PWM Solar Charge Controller FAQs
What Is a PWM Solar Charge Controller?
A PWM solar charge controller is a device that regulates power moving from a solar array into a battery bank.
As mentioned above, PWM stands for Pulse Width Modulation. This means that the controller rapidly switches the connection between the solar panels and batteries on and off, adjusting the charging current as the battery approaches its target voltage.
Like other solar charge controllers, a PWM controller has several important jobs. It helps:
-
Regulate battery charging
-
Prevent overcharging
-
Maintain the appropriate charging voltage
-
Prevent reverse current from the battery bank back toward the solar array
The important difference between PWM and MPPT is what happens to the voltage coming from the solar panels.
A PWM controller does not perform DC-to-DC voltage conversion. When the controller connects the panels to the battery, the solar array directly connects to the batteries, even for a millisecond.
That works reasonably well when the panel voltage and battery-bank voltage are closely matched. If there is a large difference between them, however, some of the solar panels' available power cannot be harvested as the controller prevents them from damaging the batteries.
How Pulse Width Modulation Really Works
Pulse Width Modulation, or PWM, isn't unique to solar charge controllers. It's a common method of controlling electrical power by switching a circuit on and off very rapidly instead of continuously reducing voltage with a resistive device. It uses special transistors designed to handle the power switching.
The key variable is the duty cycle: the percentage of each switching cycle that the circuit remains on.
For example:
-
At a 100% duty cycle, the switch remains on continuously = full power
-
At a 50% duty cycle, it is on half the time and off half the time.
-
At a 10% duty cycle, it is only on for one-tenth of each cycle.

Because this switching happens quickly, many electrical loads respond to the average power rather than each individual pulse.
PWM is widely used in electronics for things like motor speed control, light dimming, heating-element control, DC power regulation, and switching power supplies. Instead of wasting excess energy as heat through a resistor, a transistor or other semiconductor rapidly switches between its on and off states.
What PWM Looks Like in a Solar Charge Controller
A PWM solar charge controller applies the same basic principle between a solar array and a battery.
When the switching device inside the controller is on, the solar array is electrically connected to the battery. When it is off, that connection is interrupted.
A Simple PWM Example
Imagine a controller switching 100 times per second.
At a 75% duty cycle, the array could be connected to the battery for roughly:
7.5 milliseconds ON → 2.5 milliseconds OFF
during every 10-millisecond switching period.
At a 25% duty cycle:
2.5 milliseconds ON → 7.5 milliseconds OFF
The actual switching frequencies and charging algorithms vary by controller, but the principle remains the same: vary the width of the electrical pulses to regulate average power transfer.
This is why it's called Pulse Width Modulation.
Why Is PWM Solar Control Less Efficient for Solar?
Solar panels have a voltage and current at which they can produce their maximum available power under a given set of conditions. This is called the maximum power point.
A PWM controller doesn't actively move the solar array to that maximum power point. Instead, it rapidly connects and disconnects the array from the battery to regulate charging.
When the connection is on, the battery effectively pulls the panel's operating voltage down toward the battery voltage.
That distinction matters because solar panel power is calculated using:
Suppose a panel's maximum-power operating point is approximately 18 volts and 5.5 amps:
18V × 5.5A = 99 watts
If a PWM controller connects that panel to a battery charging at approximately 14 volts, the panel may still provide roughly the same current, but it is now operating at a lower voltage:
14V × 5.5A = 77 watts
The exact numbers will vary with the panel, battery voltage, temperature, sunlight, and controller. But the example illustrates the important point: a PWM controller can cause a solar panel to operate below the point where it could otherwise produce its maximum available wattage.
With a properly matched low-voltage panel, that tradeoff may be acceptable.
With higher-voltage panels or a larger solar array, it can become significant.

PWM vs. MPPT Solar Charge Controllers: Real Use
Both PWM and MPPT solar charge controllers can safely regulate charging when correctly selected and configured. The biggest difference is how they handle the relationship between solar-array voltage and battery voltage.
|
Feature |
PWM Solar Charge Controller |
MPPT Solar Charge Controller |
|
Basic operation |
Rapidly switches panel-to-battery connection |
Tracks panel maximum power point and performs full DC-to-DC conversion |
|
Array voltage |
Should be closely matched to battery-bank voltage |
Can accept substantially higher solar-array voltage within controller limits |
|
Available solar power |
May leave some panel wattage unused |
Harvests most of the array's available power |
|
Panel wiring flexibility |
More limited |
Higher voltage flexibility for series and series-parallel arrays |
|
Cable runs |
Lower array voltage means higher current for the same wattage |
Higher array voltage can reduce current and voltage drop between panels and controller |
|
Cost |
Typically lower |
Typically higher |
|
Best fit |
Small, simple, voltage-matched systems |
Most modern RV, marine, and off-grid systems |
|
Lithium compatibility |
Depends on available charge settings |
Depends on available charge settings |
The last point is important: PWM versus MPPT does not determine whether a charge controller is lithium-compatible.
The battery charging profile does.
When Does a PWM Solar Charge Controller Make Sense?
PWM technology isn't inherently bad or obsolete. There are still systems where replacing a working PWM controller may provide little practical benefit.
You Have a Small Solar Array
A small solar system powering modest loads may not gain enough additional energy from MPPT to justify replacing equipment that already works.
For example, a small camper with a single low-voltage panel used mainly to maintain the battery and support lighting, fans, or other modest 12V loads may operate perfectly well with PWM.
Your Solar Panels and Battery Bank Are Closely Matched
PWM performs best when the solar panels are designed for the nominal voltage of the battery bank.
For example, a "12V" nominal solar panel is designed to charge a 12V battery and normally has an operating voltage somewhat above battery charging voltage.
The closer the panel's ideal operating voltage is to the battery voltage, the smaller the potential advantage of converting that excess voltage with MPPT.
Your Existing System Already Meets Your Needs
There's an important practical question that can get lost in equipment comparisons: Are your batteries getting charged?
If an existing PWM solar charge controller reliably replenishes the battery bank, is correctly configured, and the system provides enough energy for the way you camp, replacing it simply because MPPT technology is more capable may not accomplish much.
This can be especially true for an RV that already came with a modest factory-installed solar package.
Cost Is the Main Priority
PWM controllers are generally simpler and less expensive. For very small systems where maximizing solar harvest isn't a priority, that lower cost can make sense.
However, the price gap between PWM and smaller MPPT controllers has narrowed considerably. For example, the Victron SmartSolar MPPT 75/10–100/20 provides MPPT capability for smaller solar systems without requiring a major investment. If you're buying a new controller rather than keeping one you already own, MPPT may offer considerably more room for future changes without dramatically increasing the overall system cost.
Can You Use a PWM Solar Charge Controller With Lithium Batteries?
Yes. A PWM solar charge controller can charge LiFePO4 batteries–if the controller can provide an appropriate lithium charging profile.
Changing from lead-acid to lithium batteries does not automatically require changing from PWM to MPPT.
The first question should be whether the existing solar charge controller can be configured for the battery manufacturer's charging requirements.
For Battle Born 12V LiFePO4 batteries, recommended solar charging parameters include:
-
Bulk/Absorption: 14.2V to 14.6V
-
Float: 13.4V to 13.8V
-
Equalization: Disabled; if the controller requires an equalization setting, follow Battle Born's current recommendations
-
Temperature compensation: Disabled
Some controllers offer a dedicated lithium setting. Others have a custom user-programmable profile. In some cases, an AGM preset may fall within acceptable charging parameters, but the actual voltages and other settings should always be checked rather than relying on the name of the preset.
If your PWM solar charge controller cannot provide an appropriate charging profile, replacing it with a lithium-compatible controller is the better option.
And if you're replacing the controller anyway, that's an ideal time to consider whether moving to MPPT makes more sense for the solar system as a whole.
When Should You Upgrade From PWM to MPPT?
Keeping PWM can make sense when an existing system is doing its job. But several common RV and off-grid upgrades quickly make MPPT more attractive.
You're Adding More Solar Panels
Expanding a solar system often exposes the limitations of an older PWM controller.
The existing controller needs enough current capacity for the additional panels, and the new panels need to remain compatible with the voltage requirements of the PWM system.
That can significantly restrict which panels you can use and how you can connect them.
An MPPT controller provides more flexibility because the solar-array voltage does not need to closely match the battery-bank voltage.
☀️ If you're planning an expansion, learn more about how to add more solar panels to an RV solar system and whether it makes more sense to expand an existing array or add another charge controller.

You Want to Wire Solar Panels in Series
Connecting solar panels in series increases array voltage while current remains approximately the same.
Higher voltage means lower current for the same amount of power. Lower current can reduce voltage drop through the wiring between the roof and the solar charge controller and require smaller wire.
But a higher-voltage series array generally needs an MPPT controller capable of converting that higher PV voltage to the charging voltage required by the battery bank and rated for the voltage you want to operate at.
If you're designing a higher-voltage series array, controllers such as the Victron SmartSolar MPPT 150/35 & 150/45 allow substantially higher PV input voltages than a basic 12V PWM system. The specific controller still needs to be sized around the array's maximum open-circuit voltage and expected charging current.
PWM systems are much more restrictive because panel voltage needs to stay closely matched to battery voltage.
⚡️ If you're deciding how to configure an array, see our guide to solar panels in series vs. parallel.
You Rely Heavily on Solar For Power Needs
If you spend significant time boondocking, every additional watt-hour harvested during the day can help reduce generator runtime or the need to recharge from another source.
Battle Born generally recommends approximately 200 watts of solar per 100Ah of battery capacity when solar will play a major role in recharging the system.
As the array grows, the additional flexibility and power harvest of MPPT becomes more valuable to maximize power collection.
You're Building or Rebuilding the System Anyway
If you're replacing panels, rewiring the roof, upgrading the battery bank, or installing a new solar charge controller, there is much less reason to lock the new system into PWM's voltage limitations.
MPPT provides more options for:
-
Future solar expansion
-
Different panel sizes and voltages
-
Series or series-parallel wiring
-
Longer panel-to-controller cable runs
-
Larger lithium battery banks
-
Higher-voltage battery systems
For a new RV or off-grid solar installation, MPPT is generally the more flexible long-term choice.
Is MPPT Always Better Than PWM?
From a capability standpoint, generally yes, MPPT can do things PWM cannot.
That doesn't mean every working PWM controller needs to go in the trash.
For a small system with properly matched panels, short wire runs, and enough solar production to keep the batteries charged, the real-world gain from replacing PWM may be modest.
The decision changes as the system becomes larger or more important to daily energy needs.
Think of it this way:
PWM asks you to design the solar array around the battery voltage.
MPPT gives you much more freedom to design the solar array around available panels, roof space, wiring, and energy needs—and then converts that power appropriately for the battery bank.

Upgrade Your RV Solar System With an MPPT Charge Controller
If you're expanding an RV solar array or replacing an older PWM solar charge controller, MPPT offers considerably more flexibility in panel selection, array configuration, and system growth.
Battle Born Batteries carries a full selection of MPPT solar charge controllers from Victron Energy and Rich Solar. Options range from compact SmartSolar controllers for smaller RV arrays to higher-voltage and higher-current controllers for large RV and off-grid solar systems.
For moderate RV solar arrays, the Victron SmartSolar MPPT 100/30 & 100/50 offers 30A or 50A charging options, while larger or higher-voltage arrays may call for models such as the SmartSolar MPPT 150/35 & 150/45. We also carry Rich Solar Bravo 30A–60A MPPT solar charge controllers for another range of system sizes.
The right controller depends on your solar-array voltage, array wattage, battery-bank voltage, charging requirements, and plans for future expansion.
If you're not sure what size charge controller your system needs, Battle Born's US-based technical specialists can help you select compatible components before you start changing panels or wiring. Give us a call today!
PWM Solar Charge Controller FAQs
Q: Is a PWM solar charge controller good?
A PWM solar charge controller can be a good choice for a small, simple solar system where the panel voltage closely matches the battery-bank voltage. It is inexpensive and can regulate battery charging effectively. However, PWM provides less flexibility and may harvest less available solar power than an MPPT controller.
Q: Is a PWM solar charge controller bad for lithium batteries?
No. PWM technology itself is not harmful to lithium batteries.
What matters is the charging profile. A PWM controller used with LiFePO4 batteries needs to provide charging voltages and settings that fall within the battery manufacturer's specifications.
Q: Can I use a PWM charge controller with a 12V lithium battery?
Yes, provided the controller is compatible with a 12V LiFePO4 charging profile and the solar-panel voltage is appropriate for the PWM controller and battery system.
Q: Can I replace a PWM solar charge controller with MPPT?
In many systems, yes, but the replacement controller still needs to be correctly sized for the solar array and battery bank.
Before making the change, verify maximum PV open-circuit voltage, controller output-current rating, battery voltage, wiring, fusing, and charging settings.
Changing to MPPT may also allow you to reconfigure the solar array for higher-voltage series wiring.
Q: Can I use the same solar panels when switching from PWM to MPPT?
Often, yes.
One of the advantages of MPPT is that it can accept a wider range of solar-array voltages, provided the array remains within the controller's input specifications. In some cases, panels previously wired in parallel for a PWM controller can be reconfigured into series or series-parallel strings when an appropriately sized MPPT controller is installed.
Always confirm array voltage, current, controller ratings, wiring, and circuit protection before changing the configuration.
Q: Is MPPT worth upgrading to from PWM?
It depends on the system.
If your existing PWM controller keeps your batteries charged and you have no plans to expand the solar array, an upgrade may provide limited practical benefit.
MPPT becomes much more worthwhile if you're adding panels, using higher-voltage panels, wiring panels in series, increasing battery capacity, relying heavily on solar while boondocking, or trying to maximize production from limited roof space.
Q: Which is better for an RV: PWM or MPPT?
For most new or expanded RV solar systems, MPPT is the better choice because it provides greater flexibility in panel selection, array voltage, wiring configuration, and future expansion.
PWM can still be completely adequate for a small existing system that is properly matched, correctly configured, and already meeting the RV owner's charging needs.
