Using Alternator Charging in Boat Electrical Systems
[embed]https://www.youtube.com/watch?v=nc11Id-WG2M[/embed] Using your boat’s engine is a great way to recharge your Battle Born Batteries house bank when done with the proper precautions in place. Without the necessary accessories and monitoring equipment, utilizing alternator charging can be dangerous for both your alternator and batteries. During charging, if the batteries encounter a BMS shutdown, the alternator and boat electrical system can be severely damaged. Ideally, it would be best to put all the available power from the alternator directly into the batteries. Lithium iron phosphate (LiFePO4) batteries have the capability to take a very high level of charge throughout the charging cycle. So, direct charging is preferred as it will allow you to get the maximum amount of charge in your house bank, but it is also the riskiest for your alternator.How to Safely and Efficiently Use Alternator Charging with Lithium-Ion Batteries
To directly charge your house batteries from the engine alternator, you need to use a high-quality external regulator. This communicates with your charger to tell it exactly how to charge your house bank. The Wakespeed WS500 Advanced Alternator Regulator is the best way to charge your batteries safely with your alternator.
Alternatively, a DC-to-DC charger is a simple and safe way to utilize alternator charging. In this method you use the alternator to directly charge the engine starting battery. Then the DC-to-DC charger takes power from the starting battery to charge the house bank. While this method protects your house bank by fully separating it from the alternator, it is much slower and less efficient.
