Special Hours: 7AM – 6PM PST
Shop
$40.00
Available on backorder
-
The BBGC3 Mounting Bracket Kit comes with six (6) L-shaped mounting brackets designed specifically for our BBGC3. You will also receive (18) Screws to mount the GC3 to your designated surface and (18) M5 25mm screws to hold the bracket to your GC3 feet.
Ask a technical specialist now at 855.292.2831
To install the mounting and bracket screws, please use a Phillips standard screwdriver (pictured below).
For installation purposes, users will require a standard Phillips screwdriver. Our team recommends hand tightening only when installing your kit. Please keep in mind that under-tightening the screws on your mounting kit, combined with vibration caused by your vehicle can cause the screws to loosen and become unseated.
Conversely, the overtightening of your kit screws could result in your screws becoming stripped and unusable. It is recommended that you use a standard Phillips screwdriver and not any power tool or machine-operated tightening appliance when installing. Please only tighten until the mounting kit screws are firmly in place to get the most longevity possible out of them.
These mounting brackets can be used to safely mount your battery in any orientation.
Please reference the Battery Mounting Bracket Drawing under supporting documents to view proper mounting procedures.
This add-on kit includes:
Copyright ยฉ 2024 Dragonfly Energy. All rights reserved. Dragonfly Energy collects personal information for its internal use. We do not share customer information with any third parties.