Shop 200ah Lithium Bundle

Rated 4.00 out of 5 based on 7 customer ratings
(7 customer reviews)


This bundle includes:

  • 2 – BB10012’s  Battle Born Batteries
  • 1 – Victron Battery Monitor with Built in Blue tooth (BMV 712)  
  • 1 – Victron SmartSolar 100/30 solar charge controller  
  • 1 – Victron Multiplus 2000 watt inverter charger  
  • 1 – Precision circuits Li-BIM  
  • 1 – Victron Digital MultiControl

*Cables NOT included

*All bundles can be customized to your needs, for customization either call us at 855-292-2831 or email us at [email protected]

7 reviews for 200ah Lithium Bundle

  1. Rated 3 out of 5


    1. What is the Li-Bim module function?
    2. What is MultiContrl unit function?
    3. What size solar panlel (power) can I use with this setup?


    • Dianne F

      Hello Frank,

      1. The Li-Bim is used when you are charging your batteries off of the alternator. We usually suggest using this device when you have 3 or more batteries charging off of the alternator. Because lithium batteries can take a lot of power they will try and pull as much power off of your alternator as possible which could cause your alternator to overheat. This device is specifically made for lithium batteries and will prevent your alternator from overheating. It works on a duty cycle so it will charge the batteries for 15 minutes then take 20 minutes off. It is used for 2 batteries as well depending on the amperage your alternator is outing out. If your alternator is producing around 100 amps when charging the batteries this is a good device to use. If it’s producing a lot more, say 120 amps then you might want to look into a battery to battery charger that limits the current.

      2. The multiControl panel allows you to control the multiplies It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.

      3. Typically we see around 300 watts with a set up, you could always start with that and add more as you see the need for it.

      Please feel free to give us a call if you have any additional questions and we’ll be happy to assist! 855-292-2831.

      Thank you!

  2. Rated 5 out of 5

    Thom Staples

    Hello I have 2013 MB Sprinter 2500, 2 – 200 watt solar panels I will be purchasing three of BB batteries My alternator is 14 V/220 A ALTERNATOR.
    Can I use the Li-BIM, If not what product can you recommended

    • Dianne F

      Hello Thom,

      Yes the LI-BIM is a good choice for your application. This device will properly isolate the starter and lithium bank as well as duty cycle the charge coming from the alternator. It allows a charge for 15 minutes and then lets the alternator rest for 20 minutes.

      Thank you,

  3. Rated 4 out of 5


    Hello i have a 180 amp alternator and am running 2 BB batteries should i use the Li-BIM or a B to B charger that limits current. if I need the B to B can you recommend a product?

    • Dianne F

      Hello Tony,

      We usually recommend the Sterling Battery to battery charger(I prefer the 60 amp version as it charges faster)for applications with 2 batteries or less. We have these available on our website:
      These devices will provide a smart charge lithium algorithm to our batteries while acting as an isolator between your lead acid starter battery and the lithium bank.

      Thank you,

  4. Rated 4 out of 5

    Tyler Kuhn

    Hello, I am going to have four or five 100 watt solar panels (currently 3) and am interested in the Explorist Kit. I am thinking that 30 watts will not be enough for my setup though. Is there any way I can switch out the charge controller for a 50 amp one?

  5. Rated 5 out of 5

    Daniel Schiel

    Will the Sterling battery to battery charger 60 be adequate for 3 or more 100ah battleborn batteries?

    • Dianne F

      Hi Daniel,

      Yes, the sterling will work great for small or large battery banks.

      Thank you,

  6. Rated 5 out of 5


    This looks close to what I need. However, my alternator puts out around 180 amps. Why don’t I see any bundles with the B2B instead of the Li-Bim?

    • Dianne F

      Hi there! You can always give us a call and request to swamp out the BIM for the B2B! Call us at 855-292-2831 or email us at [email protected]!

  7. Rated 2 out of 5


    hi, is it possible to have SKU: advbp200ah, 200ah Lithium Bundle with a 230v version of the victron inverter as i live in Africa. Also, i have no need for the Li-BIM as i want to sue this in my house.

    • Dianne F

      Hi Mike,
      Give us a call and we will see how we can help customize this for you. Our phone number is 855-292-2831 or you can email us at: [email protected]. Thank you!

Add a review

Your email address will not be published. Required fields are marked *