Setting up the EPEVER Solar Charge Controller

Recently, the Epever MPPT solar charge controller has become a popular option for many different customer applications ranging from RV, van and travel trailers to off grid and marine uses. It has an automatic system voltage recognition of 12 to 24 V, and an auto-saving function to remember settings. The…

Programming a Victron SmartSolar Charge Controller Guide

Here, at Battle Born Batteries, we offer a lot of products from Victron. They make high quality products and most of their components are configurable to work with our lithium deep cycle batteries.  In this guide we wanted to show all of you how to program a Victron SmartSolar controller.    What you will need to complete this programming – At least…

Aims Solar Charge Controller 80 A MPPT

Aims is one of our most requested product names, and rightfully so. They make great products. and for that reason, we made a video on how to use their charge controller with Battle Born Batteries. If anything is unclear or if you have additional questions, please give us a call…

Victron BlueSolar MPPT 100/30-50 Charge Controller with LiFePO4

Applicable Models: 100|30, 100|50 The ease of use and user-motivated design has quickly made this Victron BlueSolar charge controller to become one of our favorites. Check out our video, where we go through how to set up the BlueSolar charge controller along with out Battle Born Batteries. If anything is…

How to Set Up a TriStar PWM Charge Controller with LiFePO4 Batteries

Setting up your Tristar PWM charge controller to work with Battle Born LiFEPO4 batteries is a cinch! Step 1: Remove the access cover. This is the front cover on the unit that is held in with four screws. Step 2: Adjust the first three DIP switches. The first three DIP…

Using the OutBack FLEXmax with a Battle Born LiFePO4 Battery

The OutBack FLEXmax is one of the most versatile chargers that we have tested. It has a very intuitive user interface that makes programming it to work with a Battle Born Battery very straightforward. Tools Needed: 1. #2 Phillips Screwdriver 2. Flat Head Screwdriver Before starting, make sure to disconnect PV…

Setting Up a TriStar Charge Controller with a Battle Born LiFePO4 Battery

The Morningstar Tri-star PWM works extremely well with any Battle Born battery bank once a few settings are changed. This guide will walk you through those changes to make the installation of your batteries as simple as possible. Step 1: Locate the DIP switches behind the negative power terminals. Notice…