Whether it be a solar charge controller or a marine grade converter, our customers want to know if their device will work to charge our batteries. We do our absolute best to test every charger we can, and by doing so, we have created this charger compatibility table of products…
The OutBack FLEXmax is one of the most versatile chargers that we have tested. It has a very intuitive user interface that makes programming it to work with a Battle Born Battery very straightforward. Tools Needed: 1. #2 Phillips Screwdriver 2. Flat Head Screwdriver Before starting, make sure to disconnect PV…
The Powermax PM3-55LK AC to DC Converter/Charger is a fantastic converter/charger that works tremendously well with Battle Born 100Ah 12V LiFePO4 batteries! The most prominent feature of this charger is the ability to manually adjust the charging voltage. This is huge for LiFePO4 batteries because it enables the user to…
Powermania MV2 Series Charger With Battle Born Batteries We at Battle Born Batteries are excited about our collaboration with Powermania out of the San Francisco Bay Area. Powermania makes a line of sealed marine chargers called the Turbo MV2 series. These 12 V chargers range in charging current from 12…
This is a comparison between one Battle Born LiFePO4 battery and two 6V GC2 batteries connected in series. A common battery configuration in RVs and golf carts involves the use of multiple 6 V GC2-style batteries connected in series to form 12 V or 24 V systems. In this post,…
Setting up your Tripp Lite RV750ULHW Inverter/Charger to work with Battle Born LiFePO4 Batteries is a snap! Follow this step by step walk through and you will be ready to get out there and stay out there in no time. Step 1: Locate DIP switches on the front panel (Figure…
The Morningstar Tri-star PWM works extremely well with any Battle Born battery bank once a few settings are changed. This guide will walk you through those changes to make the installation of your batteries as simple as possible. Step 1: Locate the DIP switches behind the negative power terminals. Notice…
The Marinco 6 amp 12 volt charger comes pre-programmed with 3 charging cycles for a quick recovery. Soft Start (<10 V for 30 seconds) Bulk Stage (10 V-14.3 V) Adsorption Stage With the built-in auto sense, this unit will detect a battery’s voltage and automatically start the charging cycle. Once…
About the MS2012 Inverter Charger The MS2012 inverter charger by Magnum Energy is a “pure” sine wave inverter, making it compatible with all A/C devices. These units were built to meet the most demanding environments. Whether it be in a mobile application, off grid, or a power back up installation, the…
Chat with a Battle Born Pro